Using LifeHammer: When you find yourself in a hazardous situation, and you have to get out of your vehicle... Simply take LifeHammer out of it's mounting by firmly pulling at the hammer end clearly labeled "PULL". Hold LifeHammer by the easy-grip handle, with the hammer end pointing up. Release the tightness of the belt and cut through a jammed seat belt by decisively pulling the seat belt into the knife slot and continuing to pull as the knife cuts through the belt. Smash the side window by swinging LifeHammer like a hammer. The glass should break into hundreds of pieces; if it doesn't; try again harder. Escape! Only use the LifeHammer in times of accidents for emergency escapes and not for any other purpose. Installation Instructions: 1. Choose a convenient, easily reached location for the driver or front seat passenger, but out of reach of children; for instance, next to the gearbox console. 2. Take the LifeHammer out of its mounting. 3. Attach the mounting to the console by using double-sided tape or velcro on the back of the holder. 4. Replace LifeHammer in its mounting. IMPORTANT: When installing the holder, do not use any screws because of potential damage to electrical wiring and components, unless the installation is performed by a certified professional. Once installed, the LifeHammer should be kept in it's mounting at all time to ensure it's usefulness at all time to ensure it's usefulness in case of an accident. Never leave LifeHammer in the trunk or glove compartment, and keep out of the reach of children.